Room setup |
Stuff for mapping B fields: two bar magnets,
two compasses, coil with two 36" or
48" wires
|
An old computer is set up |
Use the monitor for B field distortion |
Fun with magnets |
Whoa! |
The square coil is set up on the movable
table on the side of the room
|
Square coil setup |
LabVolt power supply; connect to DC side |
Use 'gators to connect to coil wires |
"Jumping wire" is set up on back left bench |
2x4 chunks hold the wire between the poles |
Use the wire reserved for this experiment
(it's labeled, and hanging in the non-majors storeroom) |
The solenoid is set up on the back right bench |
Connect solenoid to power supply with
two meters to measure V and I |
A dual power supply is used to provide
sufficient current
|
Place the gaussmeter on the bench next to
the solenoid
|
